Creep life assessment method for online monitoring of steam turbine rotors

The principal objective of work was to develop fast and accurate method for online creep life monitoring of steam turbine rotors. For this purpose, a characteristic strain model of creep was investigated and validated using test data of 2%CrMoV rotor steel. The model was then used to determine creep damage functions which are introduced to compute creep damage at a constant temperature based on the Robinson time fraction rule. Finite element (FE) creep calculations of a turbine rotor were performed using the same creep model to obtain reference damage results for validating the proposed method. Comparisons of the results obtained using both methods showed a very good accuracy of the online creep damage predictions.     

蛋类礼盒包装结构的缓冲性能研究

目的研究蛋类礼盒包装结构的缓冲性能。方法以蛋类尺寸为基础,建立可发性聚乙烯(expandable polyethylene. EPE)缓冲单元结构和组合结构,进行静态仿真分析和实验验证,比较结构在形状、叠合层数、组合形式等参数变化时的载荷与位移。结果结构层数变化相同时,单元结构的极限载荷从143N增加到236 N,组合结构的极限载荷从224 N增加到476 N,均呈近线性增长。结论蛋类礼盒包装中,组合结构的承载能力优于单元结构,通过单元结构的组合,可满足不同蛋类的包装要求。     

Uplift capacity of horizontal anchor plate in geocell reinforced sand

The paper investigates the uplift performance of horizontal anchor plate in geocell reinforced sand through a series of model tests. It is noted that the unreinforced anchor plate undergoes a clear failure at a displacement of about 3% of its width, whereas with the provision of geocell and a layer of geotextile right below the geocell mattress significantly increases the uplift capacity by about 4.5 times higher than that of unreinforced sand and could sustain anchor displacement of more than 60%. Results indicates that the geocell mattress by virtue of its rigidity distributes the uplift load in the lateral directions to a larger area, thereby reducing the stress in the overlying soil mass and hence increases the performance of anchor plate system. The provision of the additional geotextile layer right below the geocell mattress is found to be very effective in increasing the stiffness as well as load carrying capacity of anchor plate system. The optimum size (i.e., width and length) of geocell mattress giving adequate load carrying capacity of anchor plate is found to be 5.4 times of anchor width (5.4B). The comparison of model tests results with 3D numerical analysis shows good agreement, indicating that the proposed model is able to capture the uplift load-displacement behaviour of geocell reinforced anchor plate system.     

高温深井通风降温技术的适用条件研究

随着矿山开采深度的不断增加，“三高一扰动”恶劣开采环境问题日益突出，给矿井通风降温工作带来极大困难。对于深井矿山，仅采用通风降温难以满足深部开采的需要，系统研究高温深井矿山通风降温技术的适用性问题，对矿山深部开采具有重要的理论意义和工程适用价值。首先从热力学角度，揭示风流在通风线路中的热交换规律；其次利用差分法原理计算深井筒风流温度，并依此推导出巷道和回采工作面风流温度变化趋势；然后结合采场安全生产允许温度进行反推，最终获取通风降温条件下的可采极限深度计算公式，并选取广西铜坑矿锌多金属矿体作为工程应用试验区进行论证分析。结果表明：基于风流的热交换模型可以推导出风流在井筒、巷道及工作面的温度计算公式，该公式与低温梯度、风流流经路径长度有关；假定工作面温度达到安全开采允许最高温度，可反推出该条件下矿山可采极限深度和巷道通风极限长度（仅采用通风降温措施时）；基于铜坑矿区锌多金属矿的实际条件，代入相关数据，验证计算所得极限开采深度符合实际，即所推导公式是可行的。     

Loadbearing capacity of infill masonry walls considering the deformation‐based membrane effect

According to currently valid codes, it is not possible to determine the loadbearing capacity of unreinforced infill walls considering the deformation‐based membrane effect by incorporating the exact support conditions. One reason for this is the lack of a validated calculation procedure, which in addition to the equilibrium conditions also realistically represents the compatibility conditions of these systems. In the present paper, therefore, a new non‐linear analytical calculation procedure is presented. The main focus of the analysis of walls subject to area loading is the incorporation of the support conditions and thus the consideration of the deformation‐based membrane compressive force. Through generalised formulation and a standardised notation of the determination equations, different material behaviours and various support conditions can be taken into account with few parameters. On the action side, both lighter loading like wind loads and heavier loading like explosion loads can be considered. Through the implementation of the partial factor concept, it is possible to comply with the requirements of European codes and thus ensure the applicability of the analysis model.     

基于连续介质损伤力学的7075铝合金高温成形极限理论预测与数值仿真

开展7075铝合金高温单向拉伸试验和成形极限试验，获得了不同温度和应变率的应力-应变曲线和成形极限曲线。结果表明，在较高的温度和应变率时7075铝合金的强度减小、成形性提高。为描述7075铝合金高温损伤演化过程，提出一种改进的连续介质损伤模型，并建立了耦合损伤的多轴统一黏塑性本构模型。基于试验结果，运用NSGAII遗传算法标定了模型中的参数，标定后的本构模型可以很好地预测7075铝合金的高温热力行为和极限应变。通过有限元软件Abaqus的用户材料子程序VUMAT，该本构模型被编入到Abaqus软件中进行数值仿真计算。结果表明，仿真获得的成形极限曲线和应变场分布与试验和理论结果吻合度好，进一步证明了所建立的耦合损伤的多轴本构模型的正确性及其在高温成形极限有限元仿真中的适用性。     

载荷影响下的机电阻抗协整结构损伤识别方法

高频机电阻抗(electromechanical impedance, 简称EMI)方法利用粘贴在结构表面的压电传感器(piezoelectric transducer, 简称PZT)进行主动激励，通过连续监测和分析PZT机电导纳信号的变化评估结构的健康状态；然而EMI方法容易受到环境工况变化的影响，导致结构损伤的误报。针对此问题，采用时间序列协整方法处理及消除结构工作载荷对阻抗谱特征信号的影响。该方法是基于结构动荷载作用下PZT阻抗谱导纳信号的非平稳特征，将动荷载影响下的阻抗谱非平稳时间序列经线性组合变换成平稳时间序列，根据得到的协整余量序列有效判断结构的健康状态。为验证该方法的有效性，开展了动应力影响下铝梁结构的螺栓松动损伤识别实验。结果表明，协整消除了动态应力对EMI方法的影响，当铝梁内存在持续变化的应力时，仍可以准确识别螺栓松动。机电阻抗协整方法能够消除结构健康监测中荷载作用的影响，及时准确地进行结构损伤识别。     

Life history of Plodia interpunctella Hübner on sunflower seeds: Effects of seed qualitative traits and the initial seed damage

Sunflower seeds are regularly infested by Plodia interpunctella during storage. Although this pest prefers damaged seeds, in practice it can infest undamaged seeds as well. This research assessed the influence of the sunflower seed type (oil, protein for human consumption and bird-feed) and the initial seed damage during post-harvest processing (dehulled kernels, 10, 20, 30% of damaged seeds and undamaged seeds) on development of P. interpunctella (larval mortality, larval development, mean developmental duration, adult emergence and fecundity). Biochemical analysis of seeds, kernels and hulls detected the highest content of phenols in the seed and hull and tocopherols in the kernel of the oil type hybrid. The antioxidative activity was the highest in the seed, kernel and hull of the protein type for bird feed. The shortest development (39.5 days) and the highest fecundity (91.3) were on the oil type seeds, while the longest development (42.1 days) and the lowest fecundity (68.1) were on the seeds of the protein type for bird feed. The highest mortality of larvae was on the undamaged seeds of the protein type for bird feed and human consumption (21.3% and 14.0%, respectively). The type of sunflower and the level of initial damage affected larval mortality, developmental duration and fecundity. The mean developmental duration and the number of emerged adults were dependent only on the initial seed damage. Principal component analysis detected strong positive correlation between mortality and development with the tocopherol content on the undamaged seeds while fecundity was associated with the state of kernel and the amount of tannins, proteins and oil content in the seed. The undamaged seeds of the protein type for the bird feed were the least suitable for the development of this pest, while the oil type kernels were the most suitable.     

Multi-hazard loss analysis of tall buildings under wind and seismic loads

This paper presents a framework for life-cycle loss estimation for non-structural damage in tall buildings under wind and seismic loads. Life-cycle cost analysis is a useful design tool for decision- makers, aimed at predicting monetary losses over the lifetime of a structure, accounting for uncertainties involved in the problem definition. For tall buildings, sensitive to dynamic excitations like earthquake and wind, it can be particularly suitable to base design decisions not only on initial cost and performance but also on future repair expenses. The proposed approach harmonises the procedures for intervention costs evaluation of structures subjected to multiple-hazards, taking into account the peculiar differences of wind and earthquake, in terms of load characterisation, type and evolution of damage. Relative effect of the two hazards on damage to drift- and acceleration-sensitive non-structural elements are examined. The influence of uncertainty in structural damping is also taken into account. It is shown that, although it is commonly believed that the design of a given structure is usually dominated by either winds or earthquakes, when LCC-based design is performed, both winds and earthquakes may be important.